dmesg - Rockchip ARMv8 Cortex-A76 - Mali-G610 31GB - Orange
Booting Linux on physical CPU 0x0000000000 [0x412fd050]
Linux version 5.10.160-rockchip (root@bos01-arm64-030) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #21 SMP Thu Nov 16 21:08:32 UTC 2023
Machine model: Orange Pi 5 Plus
efi: UEFI not found.
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
OF: reserved mem: initialized node cma, compatible id shared-dma-pool
Zone ranges:
DMA [mem 0x0000000000200000-0x00000000ffffffff]
DMA32 empty
Normal [mem 0x0000000100000000-0x00000007ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000200000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000003fbffffff]
node 0: [mem 0x00000003fc500000-0x00000003ffefffff]
node 0: [mem 0x0000000400000000-0x00000007ffffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x00000007ffffffff]
On node 0 totalpages: 8321024
DMA zone: 15352 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 982528 pages, LIFO batch:63
Normal zone: 114688 pages used for memmap
Normal zone: 7338496 pages, LIFO batch:63
On node 0, zone Normal: 256 pages in unavailable ranges
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 32 pages/cpu s93480 r8192 d29400 u131072
pcpu-alloc: s93480 r8192 d29400 u131072 alloc=32*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: patching kernel code
Built 1 zonelists, mobility grouping on. Total pages: 8190984
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
Memory: 32266484K/33284096K available (18880K kernel code, 3836K rwdata, 7212K rodata, 7296K init, 671K bss, 755468K reserved, 262144K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 70161 entries in 275 pages
ftrace: allocated 275 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 480 SPIs implemented
GICv3: 0 Extended SPIs implemented
GICv3: Distributor has no Range Selector support
GICv3: 16 PPIs implemented
GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
ITS [mem 0xfe640000-0xfe65ffff]
ITS@0x00000000fe640000: allocated 8192 Devices @100110000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100120000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
ITS [mem 0xfe660000-0xfe67ffff]
ITS@0x00000000fe660000: allocated 8192 Devices @100140000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100150000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000100160000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000100170000
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
rcu: Hierarchical SRCU implementation.
Platform MSI: msi-controller@fe640000 domain created
Platform MSI: msi-controller@fe660000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000100180000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000100190000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
GICv3: CPU3: using allocated LPI pending table @0x00000001001a0000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
CPU features: detected: Spectre-v4
CPU features: detected: Spectre-BHB
Detected PIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
GICv3: CPU4: using allocated LPI pending table @0x00000001001b0000
CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
Detected PIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
GICv3: CPU5: using allocated LPI pending table @0x00000001001c0000
CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
Detected PIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
GICv3: CPU6: using allocated LPI pending table @0x00000001001d0000
CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
Detected PIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
GICv3: CPU7: using allocated LPI pending table @0x00000001001e0000
CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU features: detected: Privileged Access Never
CPU features: detected: User Access Override
CPU features: detected: 32-bit EL0 Support
CPU features: detected: Common not Private translations
CPU features: detected: RAS Extension Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: CRC32 instructions
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
CPU features: detected: RCpc load-acquire (LDAPR)
CPU: All CPU(s) started at EL2
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
KASLR disabled due to lack of seed
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters, enabled
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
Registered FIQ tty driver
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
ramoops: dmesg-0 0x20000@0x0000000000110000
ramoops: console 0x80000@0x0000000000130000
ramoops: pmsg 0x50000@0x00000000001b0000
printk: console [ramoops-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: using 0xf0000@0x110000, ecc: 0
rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
rockchip-pinctrl pinctrl: probed pinctrl
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
raid6: neonx8 gen() 5486 MB/s
raid6: neonx8 xor() 4262 MB/s
raid6: neonx4 gen() 5628 MB/s
raid6: neonx4 xor() 4275 MB/s
raid6: neonx2 gen() 5161 MB/s
raid6: neonx2 xor() 4034 MB/s
raid6: neonx1 gen() 4315 MB/s
raid6: neonx1 xor() 3324 MB/s
raid6: int64x8 gen() 1342 MB/s
raid6: int64x8 xor() 882 MB/s
raid6: int64x4 gen() 1654 MB/s
raid6: int64x4 xor() 880 MB/s
raid6: int64x2 gen() 2423 MB/s
raid6: int64x2 xor() 1330 MB/s
raid6: int64x1 gen() 2013 MB/s
raid6: int64x1 xor() 983 MB/s
raid6: using algorithm neonx4 gen() 5628 MB/s
raid6: .... xor() 4275 MB/s, rmw enabled
raid6: using neon recovery algorithm
fiq_debugger fiq_debugger.0: IRQ fiq not found
fiq_debugger fiq_debugger.0: IRQ wakeup not found
fiq_debugger_probe: could not install nmi irq handler
printk: console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0
vcc12v_dcin: 12000 mV, enabled
reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
vcc5v0_sys: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.2: -ENOENT
vcc5v0_sys: 5000 mV, enabled
reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
reg-fixed-voltage vcc5v0-usbdcin: Looking up vin-supply from device tree
vcc5v0_usbdcin: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.3: -ENOENT
vcc5v0_usbdcin: 5000 mV, enabled
reg-fixed-voltage vcc5v0-usbdcin: vcc5v0_usbdcin supplying 5000000uV
reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
vcc5v0_usb: supplied by vcc5v0_usbdcin
vcc5v0_usbdcin: could not add device link regulator.4: -ENOENT
vcc5v0_usb: 5000 mV, enabled
reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
vcc_1v1_nldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.5: -ENOENT
vcc_1v1_nldo_s3: 1100 mV, enabled
reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
vcc_3v3_sd_s0: 3300 mV, disabled
reg-fixed-voltage vcc-3v3-sd-s0: vcc_3v3_sd_s0 supplying 3300000uV
vbus5v0_typec: 5000 mV, disabled
reg-fixed-voltage vbus5v0-typec: Looking up vin-supply from device tree
vbus5v0_typec: supplied by vcc5v0_usb
reg-fixed-voltage vbus5v0-typec: vbus5v0_typec supplying 5000000uV
vcc3v3_pcie30: 3300 mV, disabled
reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
vcc3v3_pcie30: supplied by vcc5v0_sys
reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
reg-fixed-voltage vcc5v0-host: Looking up vin-supply from device tree
vcc5v0_host: supplied by vcc5v0_usb
vcc5v0_usb: could not add device link regulator.9: -ENOENT
vcc5v0_host: 5000 mV, enabled
reg-fixed-voltage vcc5v0-host: vcc5v0_host supplying 5000000uV
vcc3v3_pcie2x1l0: 3300 mV, disabled
reg-fixed-voltage vcc3v3-pcie2x1l0: Looking up vin-supply from device tree
vcc3v3_pcie2x1l0: supplied by vcc12v_dcin
reg-fixed-voltage vcc3v3-pcie2x1l0: vcc3v3_pcie2x1l0 supplying 3300000uV
reg-fixed-voltage vcc3v3-pcie-eth: Looking up vin-supply from device tree
vcc3v3_pcie_eth: supplied by vcc12v_dcin
vcc12v_dcin: could not add device link regulator.11: -ENOENT
vcc3v3_pcie_eth: 3300 mV, enabled
reg-fixed-voltage vcc3v3-pcie-eth: vcc3v3_pcie_eth supplying 3300000uV
vcc_mipicsi0: no parameters, enabled
reg-fixed-voltage vcc-mipicsi0-regulator: vcc_mipicsi0 supplying 0uV
vcc_mipicsi1: no parameters, enabled
reg-fixed-voltage vcc-mipicsi1-regulator: vcc_mipicsi1 supplying 0uV
vcc_mipicsi1: no parameters, enabled
debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
reg-fixed-voltage vcc-mipidcphy0-regulator: vcc_mipicsi1 supplying 0uV
wifi_disable: no parameters, enabled
reg-fixed-voltage wifi-diable-gpio-regulator: wifi_disable supplying 0uV
iommu: Default domain type: Translated
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply property in node /power-management@fd8d8000/power-controller failed
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
rockchip-cpuinfo cpuinfo: SoC : 35881000
rockchip-cpuinfo cpuinfo: Serial : 6331aac80c505445
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 655360 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14316K
rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=23 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
ntfs: driver 2.1.32 [Flags: R/W].
NET: Registered protocol family 38
xor: measuring software checksum speed
8regs : 6297 MB/sec
32regs : 8359 MB/sec
arm64_neon : 10185 MB/sec
xor: using function: arm64_neon (10185 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply from device tree
phy phy-fd5d0000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
phy phy-fd5d8000.syscon:[email protected]: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fd5d8000.syscon:[email protected]: -ENOENT
phy phy-fd5dc000.syscon:[email protected]: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fd5dc000.syscon:[email protected]: -ENOENT
phy phy-fd5d4000.syscon:[email protected]: Looking up phy-supply from device tree
vcc5v0_host: could not add device link phy-fd5d4000.syscon:[email protected]: -ENOENT
phy phy-fd5d4000.syscon:[email protected]: Looking up vbus-supply from device tree
phy phy-fd5d4000.syscon:[email protected]: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
phy phy-fee00000.phy.4: Looking up phy-supply from device tree
phy phy-fee00000.phy.4: Looking up phy-supply property in node /phy@fee00000 failed
phy phy-fee20000.phy.5: Looking up phy-supply from device tree
phy phy-fee20000.phy.5: Looking up phy-supply property in node /phy@fee20000 failed
phy phy-fee10000.phy.6: Looking up phy-supply from device tree
phy phy-fee10000.phy.6: Looking up phy-supply property in node /phy@fee10000 failed
phy phy-feda0000.phy.7: Looking up phy-supply from device tree
phy phy-feda0000.phy.7: Looking up phy-supply property in node /phy@feda0000 failed
phy phy-fedb0000.phy.8: Looking up phy-supply from device tree
phy phy-fedb0000.phy.8: Looking up phy-supply property in node /phy@fedb0000 failed
phy phy-fed60000.hdmiphy.9: Looking up phy-supply from device tree
phy phy-fed60000.hdmiphy.9: Looking up phy-supply property in node /hdmiphy@fed60000 failed
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
phy phy-fed70000.hdmiphy.10: Looking up phy-supply from device tree
phy phy-fed70000.hdmiphy.10: Looking up phy-supply property in node /hdmiphy@fed70000 failed
rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
phy phy-fee80000.phy.11: Looking up phy-supply from device tree
phy phy-fee80000.phy.11: Looking up phy-supply property in node /phy@fee80000 failed
phy phy-fed80000.phy.12: Looking up phy-supply from device tree
phy phy-fed80000.phy.12: Looking up phy-supply property in node /phy@fed80000/dp-port failed
phy phy-fed80000.phy.13: Looking up phy-supply from device tree
phy phy-fed80000.phy.13: Looking up phy-supply property in node /phy@fed80000/u3-port failed
phy phy-fed90000.phy.14: Looking up phy-supply from device tree
phy phy-fed90000.phy.14: Looking up phy-supply property in node /phy@fed90000/dp-port failed
phy phy-fed90000.phy.15: Looking up phy-supply from device tree
phy phy-fed90000.phy.15: Looking up phy-supply property in node /phy@fed90000/u3-port failed
rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
rk-pcie fe180000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe190000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe190000 failed
rk-pcie fe180000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe180000 failed
rk-pcie fe190000.pcie: no vpcie3v3 regulator found
rk-pcie fe180000.pcie: no vpcie3v3 regulator found
rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe190000.pcie: IRQ msi not found
rk-pcie fe190000.pcie: use outband MSI support
rk-pcie fe190000.pcie: Missing *config* reg space
rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000
rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
rk-pcie fe190000.pcie: Missing *config* reg space
rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
rk-pcie fe190000.pcie: invalid resource
rk-pcie fe180000.pcie: IRQ msi not found
rk-pcie fe180000.pcie: use outband MSI support
rk-pcie fe180000.pcie: Missing *config* reg space
rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
pwm-backlight backlight: Looking up power-supply from device tree
pwm-backlight backlight: Looking up power-supply property in node /backlight failed
rk-pcie fe180000.pcie: err 0x00f3000000..0x00f30fffff -> 0x00f3000000
rk-pcie fe180000.pcie: IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
rk-pcie fe180000.pcie: MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
rk-pcie fe180000.pcie: MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
rk-pcie fe180000.pcie: Missing *config* reg space
rk-pcie fe180000.pcie: invalid resource
pwm-backlight backlight: supply power not found, using dummy regulator
iep: Module initialized.
mpp_service mpp-srv: unknown mpp version for missing VCS info
mpp_service mpp-srv: probe start
mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
mpp_vdpu2 fdb50400.vdpu: probe device
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
mpp_vdpu2 fdb50400.vdpu: probing finish
mpp_vepu2 jpege-ccu: probing start
mpp_vepu2 jpege-ccu: probing finish
mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
mpp_vepu2 fdb50000.vepu: probing start
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
mpp_vepu2 fdb50000.vepu: probing finish
mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
mpp_vepu2 fdba0000.jpege-core: probing start
mpp_vepu2 fdba0000.jpege-core: attach ccu success
mpp_vepu2 fdba0000.jpege-core: probing finish
mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
mpp_vepu2 fdba4000.jpege-core: probing start
mpp_vepu2 fdba4000.jpege-core: attach ccu success
mpp_vepu2 fdba4000.jpege-core: probing finish
mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
mpp_vepu2 fdba8000.jpege-core: probing start
mpp_vepu2 fdba8000.jpege-core: attach ccu success
mpp_vepu2 fdba8000.jpege-core: probing finish
mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
mpp_vepu2 fdbac000.jpege-core: probing start
mpp_vepu2 fdbac000.jpege-core: attach ccu success
mpp_vepu2 fdbac000.jpege-core: probing finish
mpp-iep2 fdbb0000.iep: Adding to iommu group 9
mpp-iep2 fdbb0000.iep: probe device
mpp-iep2 fdbb0000.iep: allocate roi buffer failed
mpp-iep2 fdbb0000.iep: probing finish
mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
mpp_jpgdec fdb90000.jpegd: probe device
mpp_jpgdec fdb90000.jpegd: probing finish
mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
rkvdec2_init:1022: No niu aclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
rkvdec2_init:1025: No niu hclk reset resource define
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
mpp_rkvenc2 rkvenc-ccu: probing start
mpp_rkvenc2 rkvenc-ccu: probing finish
mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbd0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbd0000 failed
mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply from device tree
mpp_rkvenc2 fdbe0000.rkvenc-core: Looking up venc-supply property in node /rkvenc-core@fdbe0000 failed
mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
rkvenc_init:1859: failed to add venc devfreq
mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
mpp_av1dec: Adding child /av1d@fdc70000
mpp_av1dec: register device av1d-master
mpp_av1dec av1d-master: av1_iommu_of_xlate,784
av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
mpp_av1dec av1d-master: Adding to iommu group 17
mpp_av1dec av1d-master: probing start
mpp_av1dec av1d-master: probing finish
mpp_service mpp-srv: probe success
rk-pcie fe150000.pcie: IRQ msi not found
rk-pcie fe150000.pcie: use outband MSI support
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000
rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
rk-pcie fe150000.pcie: Missing *config* reg space
rk-pcie fe150000.pcie: invalid resource
dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
rockchip-pvtm fda40000.pvtm: pvtm@0 probed
rockchip-pvtm fda50000.pvtm: pvtm@1 probed
rockchip-pvtm fda60000.pvtm: pvtm@2 probed
rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
rockchip-system-monitor rockchip-system-monitor: system monitor probe
random: crng init done
led_vk2c21_init
=============================================
rockchip-vop2 fdd90000.vop: Adding to iommu group 16
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 6
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 7
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart0-win0 as cursor plane for vp0
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart1-win0 as cursor plane for vp1
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart2-win0 as cursor plane for vp2
rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Esmart3-win0 as cursor plane for vp3
[drm] failed to init overlay plane Cluster0-win1
[drm] failed to init overlay plane Cluster1-win1
[drm] failed to init overlay plane Cluster2-win1
[drm] failed to init overlay plane Cluster3-win1
rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffff8000093b2dc8)
dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffff8000093c1050)
dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffff8000093c1050)
rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffff8000093c3c58)
rockchip-drm display-subsystem: failed to parse loader memory
rk-pcie fe170000.pcie: IRQ msi not found
rk-pcie fe170000.pcie: use outband MSI support
rk-pcie fe170000.pcie: Missing *config* reg space
rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000
rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
rk-pcie fe170000.pcie: Missing *config* reg space
rk-pcie fe170000.pcie: invalid resource
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: use tmds mode
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
Console: switching to colour frame buffer device 240x67
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x1
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
rk-pcie fe180000.pcie: PCIe Link up, LTSSM is 0x130011
rk-pcie fe180000.pcie: PCI host bridge to bus 0003:30
rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
pci_bus 0003:30: root bus resource [bus 30-3f]
pci_bus 0003:30: root bus resource [??? 0xf3000000-0xf30fffff flags 0x0]
pci_bus 0003:30: root bus resource [io 0x100000-0x1fffff] (bus address [0xf3100000-0xf31fffff])
pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref]
pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0003:30:00.0: supports D1 D2
pci 0003:30:00.0: PME# supported from D0 D1 D3hot
[drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
pci 0003:30:00.0: Primary bus is hard wired to 0
pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0003:31:00.0: [10ec:8125] type 00 class 0x020000
pci 0003:31:00.0: reg 0x10: [io 0x0000-0x00ff]
pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
pci 0003:31:00.0: supports D1 D2
pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.3.auto: dw_hdcp_qp_hdcp_probe success
dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.6.auto: dw_hdcp_qp_hdcp_probe success
brd: module loaded
rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011
rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40
pci_bus 0004:40: root bus resource [bus 40-4f]
pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
pci_bus 0004:40: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref]
loop: module loaded
rbd: loaded (major 254)
lkdtm: No crash points registered, enable through debugfs
system_heap: orders[0] = 6
system_heap: orders[1] = 4
system_heap: orders[2] = 0
pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0004:40:00.0: supports D1 D2
pci 0004:40:00.0: PME# supported from D0 D1 D3hot
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
pci 0003:30:00.0: BAR 7: assigned [io 0x100000-0x100fff]
pci 0003:31:00.0: BAR 2: assigned [mem 0xf3200000-0xf320ffff 64bit]
pci 0003:31:00.0: BAR 4: assigned [mem 0xf3210000-0xf3213fff 64bit]
pci 0003:31:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
pci 0003:30:00.0: PCI bridge to [bus 31]
pci 0003:30:00.0: bridge window [io 0x100000-0x100fff]
pci 0003:30:00.0: bridge window [mem 0xf3200000-0xf32fffff]
pci 0004:40:00.0: Primary bus is hard wired to 0
pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
pci 0004:41:00.0: reg 0x10: initial BAR value 0x00000000 invalid
pci 0004:41:00.0: reg 0x10: [io size 0x0100]
pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
pci 0004:41:00.0: supports D1 D2
pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
rockchip-spi feb20000.spi: no high_speed pinctrl state
rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
rk806 spi2.0: ON: 0x40 OFF:0x0
pcieport 0003:30:00.0: PME: Signaling with IRQ 161
rk806-regulator rk806-regulator.11.auto: Looking up vcc1-supply from device tree
vdd_gpu_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.16: -ENOENT
vdd_gpu_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc2-supply from device tree
vdd_cpu_lit_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.17: -ENOENT
vdd_cpu_lit_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc3-supply from device tree
vdd_log_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.18: -ENOENT
vdd_log_s0: 675 750 mV at 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc4-supply from device tree
vdd_vdenc_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.19: -ENOENT
vdd_vdenc_s0: 550 950 mV at 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc5-supply from device tree
vdd_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.20: -ENOENT
vdd_ddr_s0: 675 900 mV at 850 mV, enabled
pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
rk806-regulator rk806-regulator.11.auto: Looking up vcc6-supply from device tree
pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
vdd2_ddr_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.21: -ENOENT
pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
pci 0004:40:00.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
pci 0004:41:00.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0004:40:00.0: PCI bridge to [bus 41]
pci 0004:40:00.0: bridge window [io 0x1000-0x1fff]
pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff]
rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
pci_bus 0002:20: root bus resource [bus 20-2f]
pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
pci_bus 0002:20: root bus resource [io 0x300000-0x3fffff] (bus address [0xf2100000-0xf21fffff])
pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
vdd2_ddr_s3: at 500 mV, enabled
pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0002:20:00.0: supports D1 D2
pci 0002:20:00.0: PME# supported from D0 D1 D3hot
pcieport 0004:40:00.0: PME: Signaling with IRQ 173
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
rk806-regulator rk806-regulator.11.auto: Looking up vcc7-supply from device tree
vdd_2v0_pldo_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.22: -ENOENT
vdd_2v0_pldo_s3: 2000 mV, enabled
pci 0002:20:00.0: Primary bus is hard wired to 0
pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
pci 0002:21:00.0: [10ec:b852] type 00 class 0x028000
pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff]
rk806-regulator rk806-regulator.11.auto: Looking up vcc8-supply from device tree
vcc_3v3_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.23: -ENOENT
pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit]
vcc_3v3_s3: 3300 mV, enabled
pci 0002:21:00.0: PME# supported from D0 D3hot D3cold
rk806-regulator rk806-regulator.11.auto: Looking up vcc9-supply from device tree
vddq_ddr_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.24: -ENOENT
vddq_ddr_s0: at 500 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc10-supply from device tree
vcc_1v8_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.25: -ENOENT
vcc_1v8_s3: 1800 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc13-supply from device tree
vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.26: -ENOENT
vdd_0v75_s3: 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc13-supply from device tree
vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.27: -ENOENT
vdd_ddr_pll_s0: 850 mV, enabled
avdd_0v75_s0: Bringing 750000uV into 837500-837500uV
avdd_0v75_s0: ramp_delay not set
rk806-regulator rk806-regulator.11.auto: Looking up vcc13-supply from device tree
avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.28: -ENOENT
avdd_0v75_s0: 837 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc14-supply from device tree
vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.29: -ENOENT
vdd_0v85_s0: 850 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc14-supply from device tree
vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
vcc_1v1_nldo_s3: could not add device link regulator.30: -ENOENT
vdd_0v75_s0: 750 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc11-supply from device tree
avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.31: -ENOENT
avcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc11-supply from device tree
vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.32: -ENOENT
vcc_1v8_s0: 1800 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc11-supply from device tree
avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
vdd_2v0_pldo_s3: could not add device link regulator.33: -ENOENT
avdd_1v2_s0: 1200 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc12-supply from device tree
vcc_3v3_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.34: -ENOENT
vcc_3v3_s0: 3300 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcc12-supply from device tree
vccio_sd_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.35: -ENOENT
vccio_sd_s0: 1800 3300 mV at 3300 mV, enabled
rk806-regulator rk806-regulator.11.auto: Looking up vcca-supply from device tree
pldo6_s3: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.36: -ENOENT
pldo6_s3: 1800 mV, enabled
rk806 spi2.0: no sleep-setting state
rk806 spi2.0: no reset-setting pinctrl state
rk806 spi2.0: no dvs-setting pinctrl state
pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
pci 0002:20:00.0: BAR 7: assigned [io 0x300000-0x300fff]
pci 0002:21:00.0: BAR 2: assigned [mem 0xf2200000-0xf22fffff 64bit]
pci 0002:21:00.0: BAR 0: assigned [io 0x300000-0x3000ff]
pci 0002:20:00.0: PCI bridge to [bus 21]
pci 0002:20:00.0: bridge window [io 0x300000-0x300fff]
pci 0002:20:00.0: bridge window [mem 0xf2200000-0xf22fffff]
rockchip-spi feb20000.spi: register misc device rkspi-dev2
rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
pcieport 0002:20:00.0: PME: Signaling with IRQ 184
spi-nor spi5.0: XM25QU128C (16384 Kbytes) read_data x4
1 fixed-partitions partitions found on MTD device sfc_nor
Creating 1 MTD partitions on "sfc_nor":
0x000000000000-0x000001000000 : "loader"
r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI-RSS loaded
r8125 0003:31:00.0: enabling device (0000 -> 0003)
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8125 Copyright (C) 2022 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI-RSS loaded
r8125 0004:41:00.0: enabling device (0000 -> 0003)
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8125 Copyright (C) 2022 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
usbcore: registered new interface driver rndis_wlan
=======================================================
==== Launching Wi-Fi driver! (Powered by Rockchip) ====
=======================================================
Realtek 8821CS SDIO WiFi driver (Powered by Rockchip,Ver v5.14.2-28-g6011b0372.20220328) init.
[WLAN_RFKILL]: rockchip_wifi_power: 1
[WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
RTW: module init start
RTW: rtl8821cs v5.14.2-28-g6011b0372.20220328
RTW: build time: Nov 16 2023 13:36:01
RTW: rtl8821cs BT-Coex version = COEX20210319-5555
RTW: module init ret=0
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply property in node /power-management@fd8d8000/power-controller failed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
ehci-platform fc800000.usb: EHCI Host Controller
ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.160-rockchip ehci_hcd
usb usb1: SerialNumber: fc800000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform fc880000.usb: EHCI Host Controller
ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.160-rockchip ehci_hcd
usb usb2: SerialNumber: fc880000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
ohci-platform fc840000.usb: Generic Platform OHCI controller
ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 5.10.160-rockchip ohci_hcd
usb usb3: SerialNumber: fc840000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform fc8c0000.usb: Generic Platform OHCI controller
ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: Generic Platform OHCI controller
usb usb4: Manufacturer: Linux 5.10.160-rockchip ohci_hcd
usb usb4: SerialNumber: fc8c0000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
phy phy-fd5d4000.syscon:[email protected]: illegal mode
xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 5
xhci-hcd xhci-hcd.12.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
xhci-hcd xhci-hcd.12.auto: irq 250, io mem 0xfc400000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb5: SerialNumber: xhci-hcd.12.auto
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 6
xhci-hcd xhci-hcd.12.auto: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.10.160-rockchip xhci-hcd
usb usb6: SerialNumber: xhci-hcd.12.auto
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
Error: Driver 'Goodix-TS' is already registered, aborting...
usbcore: registered new interface driver usbtouchscreen
.. rk pwm remotectl v2.0 init
input: febf0030.pwm as /devices/platform/febf0030.pwm/input/input0
remotectl-pwm febf0030.pwm: pwm version is 0x2130000
remotectl-pwm febf0030.pwm: Controller support pwrkey capture
input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.10.auto/input/input1
i2c /dev entries driver
rk860-regulator 0-0042: Looking up vin-supply from device tree
vdd_cpu_big0_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.37: -ENOENT
vdd_cpu_big0_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 0-0043: Looking up vin-supply from device tree
vdd_cpu_big1_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.38: -ENOENT
vdd_cpu_big1_s0: 550 1050 mV at 800 mV, enabled
rk860-regulator 1-0042: Looking up vin-supply from device tree
vdd_npu_s0: supplied by vcc5v0_sys
vcc5v0_sys: could not add device link regulator.39: -ENOENT
vdd_npu_s0: 550 950 mV at 800 mV, enabled
typec_fusb302 6-0022: Looking up vbus-supply from device tree
rtc-hym8563 6-0051: rtc information is invalid
rtc-hym8563 6-0051: registered as rtc0
rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400)
Goodix-TS 7-0014: Looking up AVDD28-supply from device tree
Goodix-TS 7-0014: Looking up AVDD28-supply property in node /i2c@fec90000/touchscreen@14 failed
Goodix-TS 7-0014: supply AVDD28 not found, using dummy regulator
Goodix-TS 7-0014: Looking up VDDIO-supply from device tree
Goodix-TS 7-0014: Looking up VDDIO-supply property in node /i2c@fec90000/touchscreen@14 failed
Goodix-TS 7-0014: supply VDDIO not found, using dummy regulator
Goodix-TS 7-0014: i2c test failed attempt 1: -6
Goodix-TS 7-0014: i2c test failed attempt 2: -6
Goodix-TS 7-0014: I2C communication failure: -6
rkcifhw fdce0000.rkcif: Adding to iommu group 15
rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
rkisp_hw fdcb0000.rkisp: no find phandle sram
rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5
rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: bin=0
cpu cpu0: leakage=8
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: pvtm=1402
cpu cpu0: pvtm-volt-sel=0
cpu cpu0: Looking up cpu-supply from device tree
cpu cpu0: Looking up mem-supply from device tree
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: bin=0
cpu cpu4: leakage=7
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: pvtm=1630
cpu cpu4: pvtm-volt-sel=2
cpu cpu4: Looking up cpu-supply from device tree
cpu cpu4: Looking up mem-supply from device tree
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: bin=0
cpu cpu6: leakage=7
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: pvtm=1630
cpu cpu6: pvtm-volt-sel=2
cpu cpu6: Looking up cpu-supply from device tree
cpu cpu6: Looking up mem-supply from device tree
cpu cpu0: avs=0
usb 5-1: new high-speed USB device number 2 using xhci-hcd
cpu cpu4: avs=0
cpu cpu6: avs=0
cpu cpu0: EM: OPP:816000 is inefficient
cpu cpu0: EM: OPP:600000 is inefficient
cpu cpu0: EM: created perf domain
cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
cpu cpu4: EM: OPP:816000 is inefficient
cpu cpu4: EM: OPP:600000 is inefficient
cpu cpu4: EM: created perf domain
cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
cpu cpu6: EM: OPP:816000 is inefficient
cpu cpu6: EM: OPP:600000 is inefficient
cpu cpu6: EM: created perf domain
cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 99,32 bit host data width,256 deep fifo
dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
ledtrig-cpu: registered to indicate activity on CPUs
arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
cryptodev: driver 1.12 loaded.
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
optee: probing for conduit method.
optee: api uid mismatch
optee: probe of firmware:optee failed with error -22
usbcore: registered new interface driver snd-usb-audio
[Awinic] aw87xxx_pa_init:driver version: v2.2.0
rockchip-i2s-tdm fddf0000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-i2s-tdm fddf4000.i2s: CLK-ALWAYS-ON: mclk: 12288000, bclk: 3072000, fsync: 48000
debugfs: File 'Capture' in directory 'dapm' already present!
input: rockchip-dp0 rockchip-dp0 as /devices/platform/dp0-sound/sound/card0/input2
input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card1/input3
input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card2/input4
debugfs: File 'Capture' in directory 'dapm' already present!
input: rockchip-hdmiin rockchip-hdmiin as /devices/platform/hdmiin-sound/sound/card3/input5
input: headset-keys as /devices/platform/es8388-sound/input/input6
ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
mmc0: Host Software Queue enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 A3A564 233 GiB
mmcblk0boot0: mmc0:0001 A3A564 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 A3A564 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 A3A564 partition 3 16.0 MiB, chardev (237:0)
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:20348927 != 488554495
GPT:Alternate GPT header not at the end of the disk.
GPT:20348927 != 488554495
GPT: Use GNU Parted to correct GPT errors.
mmcblk0: p1 p2
usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2.1 Hub
usb 5-1: Manufacturer: GenesysLogic
input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card4/input7
Initializing XFRM netlink socket
NET: Registered protocol family 17
[BT_RFKILL]: Enter rfkill_rk_init
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
[WLAN_RFKILL]: can't find rockchip,grf property
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275p
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 8, flags = 0.
[WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[WLAN_RFKILL]: Exit rfkill_wlan_probe
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 21.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 150.
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt_default device registered.
Key type dns_resolver registered
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
pstore: Using crash dump compression: deflate
rga3_core0 fdb60000.rga: Adding to iommu group 2
rga: rga3_core0, irq = 36, match scheduler
rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core0 probe successfully
rga3_core1 fdb70000.rga: Adding to iommu group 3
rga: rga3_core1, irq = 37, match scheduler
vendor storage:20190527 ret = 0
rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
rga: rga3_core1 probe successfully
rga: rga2, irq = 38, match scheduler
rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
rga: rga2 probe successfully
rga_iommu: IOMMU binding successfully, default mapping core[0x1]
rga: Module initialized. v1.3.0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
reg-fixed-voltage pcie20-avdd0v85: Looking up vin-supply from device tree
pcie20_avdd0v85: supplied by vdd_0v85_s0
vdd_0v85_s0: could not add device link regulator.40: -ENOENT
pcie20_avdd0v85: 850 mV, enabled
reg-fixed-voltage pcie20-avdd0v85: pcie20_avdd0v85 supplying 850000uV
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
reg-fixed-voltage pcie20-avdd1v8: Looking up vin-supply from device tree
pcie20_avdd1v8: supplied by avcc_1v8_s0
avcc_1v8_s0: could not add device link regulator.41: -ENOENT
mali fb000000.gpu: Kernel DDK version g18p0-01eac0
mali fb000000.gpu: Looking up mali-supply from device tree
pcie20_avdd1v8: 1800 mV, enabled
reg-fixed-voltage pcie20-avdd1v8: pcie20_avdd1v8 supplying 1800000uV
mali fb000000.gpu: Looking up mem-supply from device tree
reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
pcie30_avdd0v75: supplied by avdd_0v75_s0
avdd_0v75_s0: could not add device link regulator.42: -ENOENT
mali fb000000.gpu: Looking up mali-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
mali fb000000.gpu: Looking up mem-supply from device tree
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
pcie30_avdd0v75: 750 mV, enabled
mali fb000000.gpu: Looking up mali-supply from device tree
reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
vdd_gpu_s0: Failed to create debugfs directory
reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
pcie30_avdd1v8: supplied by avcc_1v8_s0
avcc_1v8_s0: could not add device link regulator.43: -ENOENT
pcie30_avdd1v8: 1800 mV, enabled
reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
mali fb000000.gpu: bin=0
mali fb000000.gpu: leakage=11
mali fb000000.gpu: Looking up mali-supply from device tree
debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
rockchip-dmc dmc: Looking up center-supply from device tree
rockchip-dmc dmc: Looking up mem-supply from device tree
rockchip-dmc dmc: Looking up center-supply from device tree
vdd_ddr_s0: could not add device link dmc: -EEXIST
vdd_ddr_s0: Failed to create debugfs directory
rockchip-dmc dmc: Looking up mem-supply from device tree
vdd_log_s0: could not add device link dmc: -EEXIST
vdd_log_s0: Failed to create debugfs directory
rockchip-dmc dmc: bin=0
rockchip-dmc dmc: leakage=26
rockchip-dmc dmc: leakage-volt-sel=0
rockchip-dmc dmc: soc version=0, speed=0
mali fb000000.gpu: pvtm=815
mali fb000000.gpu: pvtm-volt-sel=0
rockchip-dmc dmc: avs=0
rockchip-dmc dmc: current ATF version 0x100
rockchip-dmc dmc: normal_rate = 1560000000
rockchip-dmc dmc: reboot_rate = 2112000000
rockchip-dmc dmc: suspend_rate = 528000000
rockchip-dmc dmc: video_4k_rate = 1560000000
rockchip-dmc dmc: video_4k_10b_rate = 1560000000
rockchip-dmc dmc: video_svep_rate = 1560000000
rockchip-dmc dmc: boost_rate = 2112000000
rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
rockchip-dmc dmc: performance_rate = 2112000000
rockchip-dmc dmc: hdmirx_rate = 2112000000
rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
rockchip-dmc dmc: failed to get vop pn to msch rl
rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
rockchip-dmc dmc: could not find power_model node
mali fb000000.gpu: avs=0
W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
mali fb000000.gpu: falling back to closest match: r0p0 status 0
mali fb000000.gpu: Execution proceeding normally with fallback match
mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
mali fb000000.gpu: No priority control manager is configured
mali fb000000.gpu: No memory group manager is configured
mali fb000000.gpu: Protected memory allocator not available
mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
mali fb000000.gpu: Probed as mali0
input: adc-keys as /devices/platform/adc-keys/input/input8
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gmac-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Adding to iommu group 0
RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
RKNPU fdab0000.npu: Looking up mem-supply from device tree
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[drm] Initialized rknpu 0.9.2 20230825 for fdab0000.npu on minor 1
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up mem-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
vdd_npu_s0: Failed to create debugfs directory
RKNPU fdab0000.npu: RKNPU: bin=0
RKNPU fdab0000.npu: leakage=6
RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
RKNPU fdab0000.npu: pvtm=824
RKNPU fdab0000.npu: pvtm-volt-sel=1
RKNPU fdab0000.npu: avs=0
RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
RKNPU fdab0000.npu: failed to find power_model node
RKNPU fdab0000.npu: RKNPU: failed to initialize power model
RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
rockchip-pm rockchip-suspend: not set pwm-regulator-config
rockchip-suspend not set sleep-mode-config for mem-lite
rockchip-suspend not set wakeup-config for mem-lite
rockchip-suspend not set sleep-mode-config for mem-ultra
rockchip-suspend not set wakeup-config for mem-ultra
I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '13:36:01', on 'Nov 16 2023'.
usb 6-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB3.2 Hub
usb 6-1: Manufacturer: GenesysLogic
Mali:
Mali device driver loaded
ALSA device list:
#0: rockchip-dp0
#1: rockchip-hdmi0
#2: rockchip-hdmi1
#3: rockchip-hdmiin
#4: rockchip-es8388
Freeing unused kernel memory: 7296K
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
cgroup_enable=memory
cgroup_memory=1
usb 5-1.4: new full-speed USB device number 3 using xhci-hcd
r8125 0003:31:00.0 enP3p49s0: renamed from eth0
r8125 0004:41:00.0 enP4p65s0: renamed from eth1
usb 5-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: USB Receiver
usb 5-1.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.12.auto/usb5/5-1/5-1.4/5-1.4:1.0/0003:046D:C52B.0001/input/input9
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.12.auto-1.4/input0
input: Logitech USB Receiver Mouse as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.12.auto/usb5/5-1/5-1.4/5-1.4:1.1/0003:046D:C52B.0002/input/input10
input: Logitech USB Receiver Consumer Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.12.auto/usb5/5-1/5-1.4/5-1.4:1.1/0003:046D:C52B.0002/input/input11
input: Logitech USB Receiver System Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.12.auto/usb5/5-1/5-1.4/5-1.4:1.1/0003:046D:C52B.0002/input/input12
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.12.auto-1.4/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.12.auto-1.4/input2
async_tx: api initialized (async)
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249.11-0ubuntu3.11 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to .
systemd[1]: Initializing machine ID from D-Bus machine ID.
systemd[1]: Configuration file /lib/systemd/system/rkaiq_3A.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
systemd[1]: Queued start job for default target OEM Configuration.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Restore / save the current clock...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Enable Rockchip camera engine rkaiq...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
fuse: init (API version 7.32)
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Restore / save the current clock.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module efi_pstore.
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Started Enable Rockchip camera engine rkaiq.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Device-Mapper Multipath Device Controller...
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: [email protected]
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Apply Kernel Variables.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2351100k SS
systemd[1]: rkaiq_3A.service: Deactivated successfully.
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swaps.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
rk-pcie fe150000.pcie: PCIe Link Fail
rk-pcie fe150000.pcie: failed to initialize host
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started Journal Service.
systemd-journald[439]: Received client request to flush runtime journal.
rtkm: rtkm_prealloc_init
rtkm: rtkm_init_phy
rtkm: rtkm_init_phy: memory expansion:1
rtkm: ====================== RTKM ======================
rtkm: order use peak alloc+ size
rtkm: --------------------------------------------------
rtkm: 1 0 0 4 32768
rtkm: 2 0 0 2 32768
rtkm: 3 0 0 2 65536
rtkm: 4 0 0 4 262144
rtkm: sum 0 0 12 393216
rtkm: rtkm_prealloc_init: done ret=0
rtl8852be 0002:21:00.0: enabling device (0000 -> 0003)
BUG: spinlock bad magic on CPU#6, systemd-udevd/524
lock: 0xffff80000bead080, .magic: 00000000, .owner: /-1, .owner_cpu: 0
CPU: 6 PID: 524 Comm: systemd-udevd Not tainted 5.10.160-rockchip #21
Hardware name: Orange Pi 5 Plus (DT)
Call trace:
dump_backtrace+0x0/0x1b0
show_stack+0x20/0x2c
dump_stack_lvl+0xc8/0xf8
dump_stack+0x18/0x34
spin_bug+0x90/0xb4
do_raw_spin_lock+0x40/0xdc
_raw_spin_lock+0x18/0x24
pq_push+0xbc/0x100 [8852be]
_phl_ser_mdl_init+0x128/0x1e4 [8852be]
bk_module_init+0x40/0x68 [8852be]
dispr_register_module+0x150/0x280 [8852be]
phl_disp_eng_register_module+0x48/0x5c [8852be]
phl_register_ser_module+0x28/0x34 [8852be]
rtw_phl_init+0x5b8/0x6a8 [8852be]
rtw_hw_init+0x5c/0x19c [8852be]
rtw_dev_probe+0x35c/0x4e8 [8852be]
pci_device_probe+0xbc/0x12c
really_probe+0x2dc/0x46c
driver_probe_device+0x134/0x144
device_driver_attach+0x4c/0x78
__driver_attach+0x9c/0x164
bus_for_each_dev+0x78/0xc4
driver_attach+0x2c/0x38
bus_add_driver+0xfc/0x210
driver_register+0xbc/0xf4
__pci_register_driver+0x6c/0x7c
rtw_drv_entry+0x58/0x1000 [8852be]
do_one_initcall+0x9c/0x1e0
do_init_module+0x58/0x1f4
load_module+0x1cf4/0x22bc
__do_sys_finit_module+0xe0/0x100
__arm64_sys_finit_module+0x24/0x30
el0_svc_common.constprop.0+0x13c/0x1ec
do_el0_svc+0x8c/0x98
el0_svc+0x20/0x30
el0_sync_handler+0xb4/0x134
el0_sync+0x1a0/0x1c0
pwm-fan pwm-fan: Looking up fan-supply from device tree
pwm-fan pwm-fan: Looking up fan-supply property in node /pwm-fan failed
FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
eric-tx CALL alloc_txring !!!!
eric-tx CALL alloc_txring !!!!
rtl8852be 0002:21:00.0 wlP2p33s0: renamed from wlan1
EXT4-fs (mmcblk0p2): resizing filesystem from 2408192 to 60934139 blocks
EXT4-fs (mmcblk0p2): resized filesystem to 60934139
enP3p49s0: 0xffff80000bf60000, c0:74:2b:fe:f5:1b, IRQ 151
enP4p65s0: 0xffff80000bf80000, c0:74:2b:fe:f5:1a, IRQ 164
mali fb000000.gpu: Loading Mali firmware 0x1010000
mali fb000000.gpu: Mali firmware git_sha: ee476db42870778306fa8d559a605a73f13e455c
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vcc_mipicsi0: disabling
vcc_mipicsi1: disabling
vcc_mipicsi1: disabling
IPv6: ADDRCONF(NETDEV_CHANGE): wlP2p33s0: link becomes ready
Process accounting resumed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
rtkm: ====================== RTKM ======================
rtkm: order use peak alloc+ size
rtkm: --------------------------------------------------
rtkm: 1 0 2 4 32768
rtkm: 2 0 0 2 32768
rtkm: 3 0 0 2 65536
rtkm: 4 0 2 4 262144
rtkm: sum 0 4 12 393216
rtkm: rtkm_prealloc_destroy
rtkm: rtkm_destroy_phy
rtkm: ====================== RTKM ======================
rtkm: order use peak alloc+ size
rtkm: --------------------------------------------------
rtkm: 1 0 2 4 32768
rtkm: 2 0 0 2 32768
rtkm: 3 0 0 2 65536
rtkm: 4 0 2 4 262144
rtkm: sum 0 4 12 393216
rtkm: rtkm_prealloc_destroy: done
rtkm: rtkm_prealloc_init
rtkm: rtkm_init_phy
rtkm: rtkm_init_phy: memory expansion:1
rtkm: ====================== RTKM ======================
rtkm: order use peak alloc+ size
rtkm: --------------------------------------------------
rtkm: 1 0 0 4 32768
rtkm: 2 0 0 2 32768
rtkm: 3 0 0 2 65536
rtkm: 4 0 0 4 262144
rtkm: sum 0 0 12 393216
rtkm: rtkm_prealloc_init: done ret=0
eric-tx CALL alloc_txring !!!!
eric-tx CALL alloc_txring !!!!
rtl8852be 0002:21:00.0 wlP2p33s0: renamed from wlan0
ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
IPv6: ADDRCONF(NETDEV_CHANGE): wlP2p33s0: link becomes ready
[drm:vop2_plane_atomic_check] *ERROR* Esmart0-win0 is invisible(src: pos[0, 0] rect[64 x 64] dst: pos[1724, 968] rect[64 x 64]
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_disable] Crtc atomic disable vp0
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: get hdcp1.4 capable failed:-5
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
dwhdmi-rockchip fde80000.hdmi: i2c read err!
dwhdmi-rockchip fde80000.hdmi: get hdcp2.x capable failed:-5
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host input!
[BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
usb 5-1.1: new full-speed USB device number 4 using xhci-hcd
usb 5-1.1: New USB device found, idVendor=0bda, idProduct=b85b, bcdDevice= 0.00
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.1: Product: Bluetooth Radio
usb 5-1.1: Manufacturer: Realtek
usb 5-1.1: SerialNumber: 00e04c000001
usbcore: registered new interface driver btusb
Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
rtk_btusb: Realtek Bluetooth USB driver ver 3.1.6d45ddf.20220519-142432
usbcore: registered new interface driver rtk_btusb
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 38955
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[BT_RFKILL]: rfkill_rk_set_power: set bt wake_host input!
[BT_RFKILL]: ENABLE UART_RTS
Bluetooth: hci0: RTL: fw version 0xdfb791cb
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt shut off power
usb 5-1.1: USB disconnect, device number 4
Bluetooth: hci0: HCI reset during shutdown failed
perf: interrupt took too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 78900
perf: interrupt took too long (3166 > 3157), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (4269 > 3957), lowering kernel.perf_event_max_sample_rate to 46800
mali fb000000.gpu: [52754859673] Timeout (6000 ms) waiting for CSG slots to start, slots: 0x08
mali fb000000.gpu: [52768344482] Timeout (10 ms) waiting for global request 100 to complete
mali fb000000.gpu: Preparing to soft-reset GPU
mali fb000000.gpu: [59012190566] Timeout (6000 ms) on CSG_REQ:EP_CFG, skipping the update wait: slot mask=0x6
mali fb000000.gpu: [59029031338] Timeout (10 ms) waiting for global request 100 to complete
mali fb000000.gpu: [65269696838] Timeout (6000 ms) waiting for queue to stop on csi 0 bound to group 0 on slot 0
mali fb000000.gpu: [65269762121] Group-3 failed to get a slot for stopping the queue on csi 0 (timeout 1500 ms)
mali fb000000.gpu: [71527418000] slot 3 timeout (6000 ms) on up-running
mali fb000000.gpu: [73064887795] Suspend request sent on CSG slots 0xf timed out for slots 0xf
mali fb000000.gpu: Timeout waiting for CSG slots to suspend before reset, slot_mask: 0x0f
mali fb000000.gpu: Evicting context 32029_40 slots: 0x00
mali fb000000.gpu: [79295744762] slot 3 timeout (6000 ms) on up-running
mali fb000000.gpu: Evicting context 32029_39 slots: 0x0e
mali fb000000.gpu: Evicting context 31641_37 slots: 0x00
mali fb000000.gpu: Evicting context 22360_21 slots: 0x00
mali fb000000.gpu: Evicting context 22354_20 slots: 0x00
mali fb000000.gpu: Evicting context 21327_14 slots: 0x01
mali fb000000.gpu: Resetting GPU (allowing up to 500 ms)
mali fb000000.gpu: Register state:
mali fb000000.gpu: GPU_IRQ_RAWSTAT=0x00040000 GPU_STATUS=0x00000000 MCU_STATUS=0x00000001
mali fb000000.gpu: JOB_IRQ_RAWSTAT=0x00000000 MMU_IRQ_RAWSTAT=0x00000000 GPU_FAULTSTATUS=0x00000000
mali fb000000.gpu: GPU_IRQ_MASK=0x00000000 JOB_IRQ_MASK=0x00000000 MMU_IRQ_MASK=0x00000000
mali fb000000.gpu: PWR_OVERRIDE0=0x00000000 PWR_OVERRIDE1=0x00000000
mali fb000000.gpu: SHADER_CONFIG=0x00000000 L2_MMU_CONFIG=0x00000000 TILER_CONFIG=0x00000000
mali fb000000.gpu: reloading firmware
mali fb000000.gpu: Reset complete